| No.8337124
- Home > Supply Leads > Acting PA66 DuPont 70G30L NC010
- Product Categories
- POM (polyoxymethylene race ..
- PC plastic material
- PMMA plastic materials (acr..
- PA6 plastic materials
- PA66 plastic material
- ABS plastic materials
- PC / ABS plastic materials
- PPS plastic materials
- PA11 plastic material
- Nylon PA12 plastic material
- PBT Plastic Material
- EVA plastic materials
- K (Q) adhesive plastic mate..
- (Nylon) PA46 materials
- PET plastic materials
- PES plastic materials
- TPE plastic materials (elas..
- PP plastic materials (polyp..
- PVC plastic materials
- TPU plastic materials (poly..
- PPO plastic materials
- POE plastic materials
- PPE plastic materials
- PPA plastic materials
- TPX plastic materials
- CAB plastic materials
- TPV plastic materials
- ASA plastic materials
- PEEK plastic materials
- EPDM plastic materials
- PA6/66 sterile flame-retard..
- PA9T plastic raw materials
- PA6T plastic raw materials
- LCP plastic materials (liqu..
- Food grade POM plastic mate..
- Acting PA66 DuPont 70G30L NC010
Zytel PA66 70G30HSLR BK099 DuPont nylon resin 30% glass fiber reinforced materials DuPont Performance Polymers Product Description: 30% glass reinforced, heat stabilized, hydrolysis resistant polyamide 66 PA66 DuPont distributor of professional-quality professional services to a proxy factory original package fake a compensable filler / reinforcing material glass fiber reinforced materials, Unit Test Method 30% by weight of filler release characteristics lubricating additive lubricant physical properties of dry density after adjustment 1.37 - g / cm3 ISO 1183 ISO 294 shrinkage -4 vertical direction of flow 1.1 - 0.30%, the flow direction -% water absorption ISO 62 73 ° F, 24 hr, 0.0787 in 6.9 -% balance, 73 ° F, 0.0787 in, 50% RH 2.0 -% viscosity 150 - cm3 / g ISO 307 Unit Test method Tensile modulus mechanical properties of dry adjusted 1.42E + 6 1.04E + 6 psi ISO 527-2 tensile stress (fracture) 28300 18900 psi ISO 527-2 stretch Unit Test Method Charpy notched strain (fracture) 3.5 5.0% ISO 527-2 Impact Dry Conditioned impact strength (73 ° F) 6.2 7.1 ft · lb / in2 ISO 179 / 1eA simply supported beam without notched impact strength ISO 179 / 1eU -22 ° F 29 - ft · lb / in2 73 ° F 38 44 ft · lb / in2 Notched Izod impact strength (73 ° F) 5.7 6.7 ft · lb / in2 ISO 180 / 1A thermal performance Unit Test Method Heat Deflection Temperature dry adjusted 66 psi, without annealing 500 - ° F ISO 75-2 / B 264 psi, without annealing 487 - ° F ISO 75-2 / A glass transition temperature 3176-- ° F ISO 11357-2 melt temperature 3 504 - ° F ISO 11357-3 linear thermal expansion coefficient of ISO 11359-2 flow 1.6E-5 - in / in / ° F transverse 5.3E-5 - in / in / ° Unit Test Method Surface Resistivity F Electrical Performance Dry Conditioned - 1.0E + 12 ohm IEC 60093 volume resistivity of 1.0E + 13 - ohm · cm IEC 60093 dissipation factor IEC 60250 100 Hz 0.016 - 1 MHz 0.016 - compared to the resistance to tracking index (CTI) (0.118 in) PLC 0 - UL 746 Tracking Index 600 - V IEC 60112 flammability Dry Conditioned Unit Test Method flammability rating IEC 60695-11- 10, -20 0.0280 in HB - 0.0591 in HB - LOI 24 -% ISO 4589-2 mold filling analysis units adjusted melt dry density 1.21 - g / cm3 Specific Heat Capacity of Melt 0.547 - - Btu / lb / ° F Thermal Conductivity of Melt 1.5 - Units Effective Btu · in / hr / ft2 / ° F dry adjusted supplemental information Thermal Diffusivity 0.0685 - cSt