Zytel PA66 132F NC010 DuPont nylon resins, DuPont Performance Polymers Product description: non-enhanced, nuclear, Polyamide 66 PA66 DuPont distributor of professional-quality professional services agent original package fake a compensable releasing lubricant additives Unit Test Method lubricating properties of the physical properties of dry density after adjustment 1.14 - g / cm3 ISO 1183 ISO 294-4 shrinkage of 1.2 vertical flow direction - the direction of flow of 0.90% -% water absorption ISO 62 73 ° F, 24 hr , 0.0787 in 8.5 -% balance, 73 ° F, 0.0787 in, 50% RH 2.6 - Unit Test Method% after adjusting the mechanical properties of dry tensile modulus 493000 232000 psi ISO 527-2 tensile stress (yield) 13200 8700 psi ISO 527-2 tensile strain (yield) 4.5 22% ISO 527-2 nominal tensile strain of 13> 50% ISO 527-2 flexural modulus 435000 203000 psi ISO 178 film Dry Conditioned Unit Test Methods Elongation - MD (yield) 4.4 - Unit Test Method Charpy notched impact strength% ISO 527-3 Dry Conditioned impact strength ISO 179 / 1eA -22 ° F 1.7 1.2 ft · lb / in2 73 ° F 1.9 3.8 ft · lb / in2 simply supported beam without notched impact strength ISO 179 / 1eU -22 ° F 95 - ft · lb / in2 73 ° F 140 ft · lb / in2 no fracture Notched Izod impact strength ISO 180 / 1A -22 ° F 1.9 0.95 ft · lb / in2 73 ° F 1.9 3.8 ft · lb / in2 unnotched Izod impact strength (73 ° F) 140 ft · lb / in2 no fracture ISO 180 / 1U Hot Dry Conditioned After the Unit Test Method Heat Deflection Temperature 66 psi, without annealing 437 - ° F ISO 75-2 / B 264 psi, without annealing 167 - ° F ISO 75-2 / A glass transition temperature 3 140 - ° F ISO 11357-2 melting temperature of 3 504 - ° F ISO 11357-3 flammability Dry Conditioned Unit Test Method flammability rating IEC 60695-11-10, -20 0.0280 in V-2 - 0.0591 in V-2 - limiting oxygen index of 29 -% ISO 4589-2