Zytel PA66 FG101L NC010 DuPont nylon resins, DuPont Performance Polymers Product description: Not reinforced polyamide 66 and developed countries in food contact applications PA66 DuPont distributor of professional-quality professional service agent original package off a lost decade additives Unit Test Method mold injection molding processing methods in the form of particles in the physical properties of dry density after adjustment 1.14 - g / cm3 ISO 1183 ISO 294-4 shrinkage flow direction 1.4 - 1.4%, the flow direction -% water absorption ISO 62 73 ° F, 24 hr, 0.0787 in 8.5 -% balance, 73 ° F, 0.0787 in, 50% RH 2.6 -% viscosity 150 - cm3 / g ISO 307 Hardness Dry Conditioned Unit Test Method Rockwell Hardness Unit Test Method ISO 2039-2 M-Scale 79 59 R-Scale 121 108 Dry Conditioned mechanical tensile modulus 450000 203000 psi ISO 527-2 tensile stress (yield) 11900 7980 psi ISO 527-2 stretch strain (yield) 4.5 25% ISO 527-2 nominal tensile strain 25> 50% ISO 527-2 tensile creep modulus ISO 899-1 1 hr - 203000 psi 1000 hr - 119000 psi flexural modulus 406000 174000 psi ISO 178 film Dry Conditioned Unit Test Method Elongation - MD (yield) 4.5 -% ISO 527-3 Impact Dry Conditioned Unit Test Method Charpy notched impact strength ISO 179 / 1eA -22 ° F 2.1 1.4 ft · lb / in2 73 ° F 2.6 7.1 ft · lb / in2 simply supported beam without notched impact strength ISO 179 / 1eU -22 ° F 190 ft · lb / in2 without breaking 73 ° F without breaking None Unit Test Method Heat distortion temperature thermal properties of dry fracture adjusted 66 psi, without annealing 392 - ° F ISO 75-2 / B 264 psi, without annealing 158 - ° F ISO 75-2 / A glass transition temperature of 3 140 - ° F ISO 11357-2 Vicat softening temperature of 464 - ° F ISO 306 / B50 melting temperature of 3 504 - ° F ISO 11357-3 ISO 11359-2 linear thermal expansion coefficient of the flow of 5.6E-5 - in / in / ° F transverse 6.1E-5 - in / in / ° F Electrical Performance Dry Conditioned Unit Test Method Surface Resistivity - 1.0E + 12 ohm IEC 60093 volume resistivity of 1.0E + 14 1.0E + 12 ohm · cm IEC 60093 dielectric strength of 810 710 V / mil IEC 60243-1 relative permittivity IEC 60250 100 Hz 3.80 6.00 1 MHz 3.50 4.00 dissipation factor IEC 60250 100 Hz 8.0E-3 0.21 1 MHz 0.018 0.075 tracking index 600 - V IEC 60112 flammability Dry Conditioned Unit Test Method flammability rating IEC 60695-11-10, -20 0.0276 in V-2 - 0.0591 in V-2 - limiting oxygen index of 28 -% ISO 4589-2 mold filling analysis units melt density dry adjusted 0.970 - g / cm3 Specific Heat Capacity of Melt 0.667 - Btu / lb / ° F Thermal Conductivity of Melt 1.1 - Btu · in / hr / ft2 / Units Effective ° F dry adjusted supplemental information Thermal Diffusivity 0.0500 - cSt