Description Delrin? FG100AL polyethylene is a high viscosity lubricating acetal homopolymer resin containing lubrication advanced systems. It has been developed for consideration into applications such as parts for the food industry. Features low coefficient of friction by lubricating homopolymer impact resistance, good creep resistance good abrasion resistance good viscosity, high gear conveyor uses non-specific food applications engineering parts RoHS Compliant contact the manufacturer Natural Color Pellets Processing Method Injection Molding Physical Nominal Value Unit Test Method Density 1.40 g/cm3 ISO 1183 melt flow rate (190 ° C/2.16 kg) 2.5 g/10 min ISO 1133 melt volume flow rate (MVR) (190 ° C / 2.16 kg) 1.70 cm3/10min ISO 1133 Shrinkage ISO 294-4 Across Flow: 2.00 mm 1.8% Flow: 2.00 mm 2.0% Mechanical Nominal Value Unit Test Method Tensile Modulus (23 ° C) 3000 MPa ISO 527 -2 tensile stress (yield, 23 ° C) 70.0 MPa ISO 527-2 Tensile strain (yield, 23 ° C) 18% ISO 527-2 off sheets rate (23 ° C) 45% ISO 527-2 flexural modulus amount (23 ° C) 2800 MPa ISO 178 Impact Nominal Value Unit Test Method Charpy notched impact strength ISO 179/1eA -30 ° C 7.0 kJ/m2 23 ° C 9.0 kJ/m2 Charpy notched impact strength ISO 179/1eU -30 ° C 170 kJ/m2 23 ° C 250 kJ/m2 Thermal Nominal Value Unit Test Method Heat Deflection Temperature 0.45 MPa, Unannealed 163 ° C ISO 75-2 / B 1.8 MPa, without annealing 97.0 ° C ISO 75-2 / A melting temperature of 4 178 ° C ISO 11357-3 ISO 11359-2 flow linear expansion coefficient: -40 to 23 ° C 0.00010 cm / cm / ° C flow: 23 到 55 ° C 0.00011 cm / cm / ° C flow: 55 到 100 ° C 0.00015 cm / cm / ° C Horizontal: -40 to 23 ° C 0.00010 cm / cm / ° C Lateral: 23 到 55 ° C 0.00011 cm / cm / ° C Horizontal: 55 to 100 ° C 0.00015 cm / cm / ° C Injection Nominal Value Unit Drying Temperature 80.0 ° C Drying time - hot air dryer 2.0 to 4.0 hr maximum recommended moisture content <0.20% processing (melt) temperature of 210 到 220 ° C Melt Temperature, Optimum - Injection Molding 215 ° C mold temperature of 80.0 到 100 ° C Mold Temperature, Optimum - Injection Molding 90 ° C